|
|
Makina Özellikleri
TREE / MAS CNC MACHINING CENTER
PC-2100 / ACRAMATIC 2100 WINDOWS BASED CNC CONTROL
Yılı : 1999 Fiyatı Fob Michigan : 53,500,00 $
Serial: 985961217
TABLE
Masa Ölçüleri: 39.37" x 19.69"
Yerden Masaya kadar Yüzey : Max. 32.30", Min.31.50"
T-Slots (no. x width x span) 3 x 0.71" x 4.92"
Max.Masa ağırlğı 660 lbs
TRAVELS
Longitudinal (X-axis) 29.53"
Cross (Y-axis) 19.69"
Vertical (Z-axis) 19.69"
Spindle Nose to Table 5.91" - 25.59"
Spindle Nose to Column 20.25"
PERFORMANCE
Cutting Feed Rate (X/Y/Z) 984 IPM
Rapid Feed Rate (X/Y/Z) 984 IPM
Axis Thrust Peak X/Y - 3,214 lbs Z- 3,964 lbs
Axis Thrust Continuous X/Y - 1,236 lbs Z- 1,588 lbs
Ball Screw Size 1.25"
SPINDLE
Main Motor ( Spindle ) 15 HP (10 kW)
Spindle Speed 40 - 10,000 RPM
Spindle Orentation Electrical
Spindle Taper Cat 40
TOOLING
ATC, Number of Tools 20
ATC, Tool Selection Drum Carousel, Bi-directional
Tool Change Time 6 Seconds (Tool to Tool)
Max. Tool Diameter
With adjacent tools 3.15"
Without adjacent tools 6.30"
Max. Tool Length 9.84"
Max. Tool Weight 13.23 lbs
GENERAL INFORMATION
Machine Width (L-R) x Depth (F-B) 100.50" x 88.75"
Machine Height 94"
Machine Weight 8800 lbs
Air Pressure Requirment 85 psi
Electrical 60 amps / 230 VAC + 5%, -10%
60 HZ 3 phase ( 25 kVA)
Will also run on 460 Volt with included Transformer
Coolant Capacity 75 Gallon
STANDARD FEATURES
Vickers PC-2100 Windows NT Based PC CNC Control
Pre-Loaded, linear motion roller bearings
Yawskawa Drive Motors
Heavily Ribbed Casting
Rigid Contruction
Remote Handwheel
Floppy Drive
Rs-232
Coolant and Chip Pans
ADDED FEATURES
10,000 RPM w/ Thermal Compensation
Ethernet Communication Interface
High Speed Die & Mold Machining Pkg Upgrade
|
